Series 10
FOR VAN AND CHASSIS APPLICATIONS
The Hutch Series 10 Slider was developed as a lighter-weight, extremely durable subframe and suspension system for the dry van and refrigerated trailer market. Unlike most sliders on the market, the Series 10 is backed by a 10-year warranty.
ABOUT
This slider utilizes an innovative frame structure with redesigned hangers that still accommodate the most popular Hutchens steel leaf springs and suspension options. The Series 10 can be matched to meet your specifications with numerous spring centers and frame depths, special attachments, and finish coat options. The Series 10 works with all current Hutchens van slider body rails and can be used in place of the H9801 spring slider. The deeper frame of the Series 10, combined with the shorter hybrid hangers, produces the same overall mounting height as the H9801.
FEATURES
– 9” deep frame made from high strength, 76 KSI minimum yield steel.
– C-Channel side rails with optimized flange contours, reduce weight and resist corrosion.
– Individual hanger towers provide vertical load support.
– The insides of the hanger towers are Sharpf® soft coated for increased corrosion resistance.
– Full-depth cross-members provide optimal lateral support.
– Huck® fasteners at high-stress cross-member attachments.
– Low profile spring hangers reduce frame stresses.
– Strategically placed, large-diameter lock pins and heavy-duty hold down clips resist braking loads and sliding forces.
– Structurally designed for maximum durability at impact zones.
– Maintenance-free, Huck® fastened rocker connection.
– Hutch’s locator bar… The industry’s best compromise in weight and strength.
– Backed by Hutchens’ 10-year warranty.
OPTIONS
The Series 10 family of products is now available for both van and chassis applications, with as many configurations and options as you may require. The Series 10 can be “soft coated” or “hot dip galvanized” upon request.
Now Offering Series 10 Replacement Hangers.
These Series 10 replacement hangers are now available:
• Front (Left) P/N 29024-01
• Front (Right) P/N 29024-02
• Center Rocker/Hanger Assembly P/N 25589-01
• Rear (Left) P/N 25576-01
• Rear (Right) P/N 25576-02
When replacing Series 10 hangers please refer to Hutchens drawing #26474 for installation instructions.
As with all Genuine Hutch aftermarket parts, Series 10 replacement hangers are backed by a 5-year warranty.
COMMON PRODUCTS
